Loading... Please wait...
  • Image 1

Hover over main image to zoom

Soul Cement Technical Sheet

$0.00

Product Description

SOUL CEMENT
TECHNICAL DATA SHEET
GENERAL INFORMATION ON USE
Name
SOUL CEMENT
Description
Finishing-layer plaster, solventless, containing vinyl
resins, mineral binders, lamellated extenders, pigments
and quartz
Classification UNI 8681
Single-component, finishing-layer plaster, dispersed in
water, reactive chemical drying (E2.A.O.A.2.HF)
Use
Indoors
Suitable substrates
Cement plasters, paints and plasters containing lime,
painted plasters, exposed reinforced concrete, precast
concrete panels, fibre cement, wood
CHARACTERISTICS
Appearance/Composition
Physical state: paste
Type of resin/binder: vinilversatic (UNI 8681: HF)
Dimensional Characteristics
Absolute gravity: 1520 ± 50 g/l
Appearance: satin finish
Performance Characteristics
Dry weight residue: 70 ± 2%
pH: > 11
Colour range
SOUL CEMENT colour chart. Colours obtainable with
dye meter
APPLICATION
Ambient conditions
Ambient temperature: min +5°C max +40°C
Relative ambient humidity: max 80%
Preparation of the substrate
Walls:
the substrates must be carefully prepared by manual
brushing and/or by washing, depending on how dirty is
the surface to treat. Old paints must be removed.
Before applying on wet plaster make sure that it is set.
Apply a coat of Metro Fix and subsequently a coat of
Metro Cover in order to level the substrate.
Plasterboard:
the substrates must be carefully prepared by manual
brushing and/or by washing, making sure that they are
free of loose bits. Apply a coat of Metro Fix and
subsequently a coat of Metro Cover in order to level
the substrate.
Already painted or varnished wooden substrates:
scrape partially or generally to eliminate residues of
existing paint or varnish that is not firmly adherent or
completely remove the existing paint by washing with
a stripping solvent-based product.
New wooden substrates or old substrates already
treated as above:
grout here and there to fill in any gaps and
microcrazing with Metro Stuc. Sand lightly to make the
surface to be treated level and even. Apply a coat of
Metro Fix and sand slightly. Then verify the consistency
of the substrate: if there are dust and/or loose bits it is
necessary to apply again Metro Fix. Apply a coat of
Metro Cover in order to level the substrate.
Type of Equipment
stainless steel trowel (Stainless Steel Pollock Trowel),
plastic trowel (Gauguin Plastic Trowel)
Dilution
ready to use
Application procedure
Apply, using a stainless-steel float, one or more layers
of SOUL CEMENT. Any rough parts of the substrate
should be treated with Metro Stuc beforehand or with
several coats of SOUL CEMENT. For marbled type
finishes, wet the last coat with a sprayer and smooth
with a stainless-steel float until a smooth, satiny finish
is obtained, or is possible to finish aesthetically the
substrate sanding with fine sand paper.
The second layer can be applied after 2 h in normal
conditions; the complete drying obtains after about 6-
8 h. The above mentioned data depend on the
absorption of the substrate and the ambient
conditions.
Dry film thickness
≈ 0,35 mm
Coverage
On two-coat render: 1.6 m2/kg (one coat); 0.8 m2/kg
(two coats); On plaster skim coat: 2 m2/kg (one coat);
Recommended amount used per m2: 1250 g (two coats)
Coverage per pack (20 kg): 40 m2 approx.
The coverage varies greatly according to the roughness
of the substrate
Coating with paint
Compatibility with other products:
with all water based products
SOUL CEMENT
N.B. This Technical Information Sheet is compiled to the best of our technical/scientific knowledge. Nevertheless, it is not binding and does not imply that we are
responsible, as the conditions of use are outside our control. It is recommended that the product is always checked as being suitable for the specific application.
IVAS Industria Vernici S.p.A. – Via Bellaria, 40 – 47030 San Mauro Pascoli (FC) – Italy
Phone +39 0541 815811 Fax +39 0541 933112 - www.metropolis-ivas.com
Company with quality management system certified UNI EN ISO 9001
TECHNICAL DATA SHEET
Issue 09-2012
Note
We recommend to use the same lot of product on a
continuous surface, otherwise, slight differences
cannot be excluded
STORAGE
Packaging
20 kg – 10 kg - 5 kg – 1 kg
Storage
Minimum and maximum temperature: +5°C +30°C.
The stability of the product is guaranteed for one year
if it is stored in its original packaging in a dry,
sheltered place. Do not store the product at less than
5°C.
SAFETY INFORMATION
Hazard classification
Hazard labels required in accordance with:
DL (Law Decree) of 3 February 1997 n° 52 amended by
DL of 25 February 1998 n°90, DMS (Ministry of Health
Decree) of 4 April 1997, DMS of 28 April 1997, DL of 16
July 1998 n° 285, Directive 1999/45/EC of 31 May 1999,
DMS of 7 July 1999, DMS of 10 April 2000, DMS of 26
January 2001, DMS of 11 April 2001, Directive 2001/58/EC,
Directive 2001/59/EC, Directive 2001/60/EC and
subsequent amendments.
Warning advice for the user
See the safety card
Odour limit
Odourless
Identification of type of waste material
In accordance with EEC decision 2000/532/EC amended as:
2001/118/EC, 2001/119/EC, 2001/573/EC and subsequent
amendments.
Plastic containers:
Classifiable with code 150102. Potentially treatable as
urban waste material in accordance with the
regulations of the individual municipalities Metal
containers:
Classifiable with code 150104. Potentially treatable as
urban waste material in accordance with the
regulations of the individual municipalities.
If the containers contain residues of liquid material
they can be classified as code 080112
Dispose of in accordance with local regulations

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Quantity:
Weight:
0.00 LBS
Shipping:
Calculated at checkout


 

Connect with us

Newsletter