Loading... Please wait...
  • Image 1

Hover over main image to zoom

Money Technical Sheet

$0.00

Product Description

MONEY
TECHNICAL DATA SHEET
INFORMATION ON USAGE
Name
MONEY
Description
Low odour, resin based metallic glitter and extender
primer, designed to enhance the colour of gold and
silver, before applying Mito and Mida. Ensures
excellent washability and a very low water absorption.
UNI 8681 classification
Single-component, physical drying, gloss, vinyl paint
dispersed in water
(B2.C.O.A.A.0.HA)
Intended use
Indoors
Suitable Substrates
Cementitious plaster, painted plaster, plaster skimmed
walls, exposed reinforced concrete, precast concrete
elements, asbestos-cement and wood
CHARACTERISTICS
Composition/appearance
Physical state: liquid
Type of resin / binder: vinyl (UNI 8681 : HF)
Appearance: semigloss-metallic
Dimensional features
Specific mass: 1,100 ± 50g/l
Performance characteristics
Solids content by weight: 50 ± 2%
pH: 7 - 8
Colours available
Gold and silver. For use as an iridescent base to
match Mito-Mida colour finishes. (See colour chart)
Can be coloured by tintometer.
APPLICATION
Environmental conditions
Ambient temperature: min +5°C, max +40°C
Relative ambient humidity: max 80%
Substrate preparation
Masonry substrates:
The substrates should be thoroughly prepared by
brushing manually. Old paint should be removed.
Make sure that fresh plaster has set before applying.
Apply one coat of Metro Fix followed by one coat of
Metro Cover to provide a smooth background. If the
background is still not smooth, apply one coat of
white Metro Coat. When the surface is dry, apply a first
coat of Money with a Magritte short hair brush.
Plasterboard substrates:
The substrates should be thoroughly prepared by
brushing or cleaning, making sure that there are no
loose areas.
Apply one coat of Metro Fix followed by one coat of
Metro Cover to provide a smooth background. If the
background is still not smooth, apply one coat of
white Metro Coat. When the surface is dry, apply a first
coat of Money with a Magritte short hair roller.
Pre-painted or varnished timber substrates:
Partially or entirely scrape to remove any loose paint
or varnish remaining or remove the paint entirely using
chemical or solvent paint stripper.
New or old timber substrates already treated as above:
Spot grout to fill any gaps and micro-cracks using
Metro Stuc.
Lightly sand to make the surface to be treated smooth
and even.
Apply one coat of Metro Fix and sand lightly. Next,
check the soundness of the substrate: if there is any
dusting or if there are loose areas, another coat of
Metro Fix should be applied. Apply one coat of Metro
Cover to provide a smooth background. If the
background is still not smooth, apply one coat of
white Metro Coat. When the surface is dry, apply a first
coat of Money with a Magritte short hair brush.
Equipment
Type: roller (Magritte roller)
Dilution
Diluent type: water
Dilution 5 - 10%
Application procedure
Apply MONEY with a Magritte short hair roller
Drying or curing at ≈ 23°C
On surfaces: 6 - 8 hours
Coverage (one coat)
9-11 m2/l according to dilution
Recommended amount used per m2: 111 ml
Coverage per pack (5 litres): 45 - 55 m2 approx.
Overpainting
Compatibility with other products: compatible with all
solvent free products
N.B.
For each specific area, we recommend using paint from
the same product batch, because there may otherwise
be slight differences in shade.
MONEY
N.B. This Technical Information Sheet is compiled to the best of our technical/scientific knowledge. Nevertheless, it is not binding and does not imply that we are
responsible, as the conditions of use are outside our control. It is recommended that the product is always checked as being suitable for the specific application.
IVAS Industria Vernici S.p.A. – Via Bellaria, 40 – 47030 San Mauro Pascoli (FC) – Italy
Phone +39 0541 815811 Fax +39 0541 933112 - www.metropolis-ivas.com
Company with quality management system certified UNI EN ISO 9001
DATA SHEET
Issue 10-2013
STORAGE
Packaging
1, 2.5 or 5 litre
Storage
Minimum and maximum temperatures: +5°C to +30°C
(in cool and frost-free conditions)
Stability in original containers: 365 days
SAFETY INFORMATION
Warning advice for the user
See safety sheet
Acceptability of odour
Odourless
Identification of waste material type
Complies with EU decision 2000/532/CE amended by:
2001/118/EC, 2001/119/EC, 2001/573/EC and subsequent
amendments
Plastic containers:
These can be classified as code 150102 - Potentially
treatable as urban waste according to individual local
authority regulations.
Metal containers:
These can be classified as code 150104 - Potentially
treatable as urban waste according to individual local
authority regulations.
If undried paint remains in the containers these can be
classified as code 080112
Dispose of in accordance with local regulations

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Quantity:
Weight:
0.00 LBS
Shipping:
Calculated at checkout


 

Connect with us

Newsletter