Loading... Please wait...
  • Image 1

Hover over main image to zoom

Mida Technical Sheet

$0.00

Product Description

MIDA
DATA SHEET
GENERAL INFORMATION ON USE
Name
MIDA
Description
Multi-coloured decorative finish based on iridescent
pigments dispersed in emulsion systems, very low
odour, metallic and washable
UNI 8681 classification
Thick-coat paint for the topcoat in a singli-component,
physical drying, semi-gloss vinyl dispersed in water
(B4.C.O.A.0.HA)
Intended use
Indoors
Suitable Substrates
Cementitious plaster, painted plaster, plaster skimmed
walls, exposed reinforced concrete, precast concrete
panels, asbestos-cement, wood and iron
CHARACTERISTICS
Composition/appearance
Physical state: Pasty liquid
Type of resin / binder: vinyl (UNI 8681: HF)
Appearance: semi-gloss metallic
Dimensional features
Density: 1,000 ± 50g/l
Performance characteristics
Solids content by weight: silver base 51 ± 2%
gold base 51.8 ± 2%
pH: 8 - 9
Colours available
MIDA colour chart. Gold base and silver base. Can be
coloured by tintometer. The chart colours have
various, slightly metallic, colourings. These enable
decorative effects to be achieved that are soft and very
comforting both to the eye and to the touch.
APPLICATION
Environmental conditions
Ambient temperature: min. +5°C, max. +40°C
Relative ambient humidity: max. 80%
Substrate preparation
Masonry substrates:
The substrates should be thoroughly prepared by
brushing manually. Poorly adhering coats of old paint
should be removed. Make sure that fresh plaster has
set before applying. Apply one coat of Metro Fix
followed by one coat of Metro Cover to provide a
smooth background. If the background is still not
smooth, apply one coat of white Metro Coat. When
the surface is dry, apply one coat of Money or Metro
Coat to match the finish (an alternative to be
considered in relation to the quality and cost of the
finished effect)
Plasterboard substrates:
The substrates should be thoroughly prepared by
brushing or cleaning, making sure that there are no
loose areas.
Apply one coat of Metro Fix followed by one coat of
Metro Cover to provide a smooth background. If the
background is still not smooth, apply one coat of
white Metro Coat. When the surface is dry, apply one
coat of Money or Metro Coat to match the finish (an
alternative to be considered in relation to the quality
and cost of the finished effect)
Pre-painted or varnished timber substrates:
Partially or entirely scrape to remove any loose paint
or varnish remaining or remove the paint entirely using
chemical or solvent paint stripper
New or old timber substrates already treated as above:
Spot grout to fill any gaps and micro-cracks using
Metro Stuc.
Lightly sand to make the surface to be treated smooth
and even.
Apply one coat of Metro Fix and sand lightly. Next,
check the soundness of the substrate: if there is any
dusting or if there are loose areas, another coat of
Metro Fix should be applied. Apply one coat of Metro
Cover to provide a smooth background. If the
background is still not smooth, apply one coat of
white Metro Coat. When the surface is dry, apply one
coat of Money or Metro Coat to match the finish (an
alternative to be considered in relation to the quality
and cost of the finished effect)
Equipment
Type: short hair roller (Magritte roller) or stainless steel
trowel (Stainless steel Pollock trowel) depending on the
desired aesthetic effects to be achieved
Dilution
10% -20% with water or as supplied when using a
trowel
Application procedure
After preparation of the substrate and when the
surface is dry, apply one coat of Money or Metro Coat
to match the finish (an alternative to be considered in
relation to the quality and cost of the finished effect).
MIDA
N.B. This Technical Information Sheet is compiled to the best of our technical/scientific knowledge. Nevertheless, it is not binding and does not imply that we are
responsible, as the conditions of use are outside our control. It is recommended that the product is always checked as being suitable for the specific application.
IVAS Industria Vernici S.p.A. – Via Bellaria, 40 – 47030 San Mauro Pascoli (FC) – Italy
Phone +39 0541 815811 Fax +39 0541 933112 - www.metropolis-ivas.com
Company with quality management system certified UNI EN ISO 9001
DATA SHEET
Issue 08-2013
When dry, apply a first coat of MIDA over the whole
area, (diluted 20% max. with water), using a short hair
roller (Magritte roller) and wait until dry.
Apply a second coat of MIDA with a short hair roller
(Magritte roller) over the whole area (slightly diluted
or left as supplied for a more emphatic effect), then
work the surface with a trowel (Stainless Steel Pollock
Trowel) using a circular motion.
A test sample is always recommended prior to each
application
Drying or curing at ≈ 23°C
Touch dry: 4 hours
Fully dry: 24 hours
Coverage (one coat)
10-12 m2/l
Recommended amount used per m2: 100 ml
Coverage per pack (5 litres): 50 - 60 m2 approx.
Coverage varies depending on the type of application
Overpainting
Compatibility with other products: compatible with all
solvent free products
N.B.
For each specific area, we recommend using paint from
the same product batch, because there may otherwise
be slight differences in shade
STORAGE
Packaging
1, 2.5 or 5 litre
Storage
Minimum and maximum temperatures: +5°C to +30°C
Stability in original containers: 365 days
SAFETY INFORMATION
Warning advice for the user
See safety sheet
Odour
Odourless
Identification of waste material type
Complies with decision 2000/532/EC amended by:
2001/118/EC, 2001/119/EC, 2001/573/EC and subsequent
amendments
Plastic containers:
These can be classified as code 150102 - Potentially
treatable as urban waste according to individual local
authority regulations.
Metal containers:
These can be classified as code 150104 - Potentially
treatable as urban waste according to individual local
authority regulations
If undried paint remains in the containers these can be
classified as code 080112
Dispose of in accordance with local regulations

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Quantity:
Weight:
0.00 LBS
Shipping:
Calculated at checkout


 

Connect with us

Newsletter