Loading... Please wait...
  • Image 1

Hover over main image to zoom

Metro Stuc Technical Sheet

$0.00

Product Description

METRO STUC
TECHNICAL DATA SHEET
GENERAL INFORMATION ON USE
Name
METRO STUC
Description
Extra-fine plaster containing synthetic resins emulsified
in an aqueous phase and selected fillers, for
smoothing coats in thin layers, excellent flowability,
spreadability and filling.
Classification UNI 8681
Single-component plaster for undercoat, dispersed in
water, physical drying reaction, flat, vinyl-versatic.
(E2.C.O.A.2.HF)
Use
Indoors
Suitable Substrates
Cement plasters, plasters containing lime, painted
plasters, smooth walls and parts in plasterboard,
primer base for encaustic finishes.
CHARACTERISTICS
Appearance/Composition
Physical state: paste
Type of resin: vinyl-versatic (UNI 8681: HF)
Dimensional Characteristics
Absolute gravity: 1820 ± 50 g/litre
Performance Characteristics
Dry weight residue: 72 ± 2%
pH: ≈7
Colour range
White
APPLICATION
Ambient conditions
Ambient temperature: min +5°C max +40°C
Relative ambient humidity: max 80%
Preparing the substrate
All the substrates must be carefully prepared by
manual brushing and/or by washing.
Type of Equipment
stainless steel trowel (Stainless Steel Pollock Trowel)
Dilution
ready to use
Application procedure
Apply several coats.
Drying or setting at ≈ 23°C
It can be covered after about 2 hours under normal
conditions but drying very much depends on the
absorption of the substrate and on the ambient
conditions.
Coverage (with two coats)
1 kg/m2
Recommended amount used per m2: 1 kg
Quantity per pack (25 kg) : 25 m2 approx.
The coverage varies according to the roughness of the
substrate.
Coating with paint
Compatibility with other products: with all thinner-free
products.
METRO STUC
N.B. This Technical Information Sheet is compiled to the best of our technical/scientific knowledge. Nevertheless, it is not binding and does not imply that we are
responsible, as the conditions of use are outside our control. It is recommended that the product is always checked as being suitable for the specific application.
IVAS Industria Vernici S.p.A. – Via Bellaria, 40 – 47030 San Mauro Pascoli (FC) – Italy
Phone +39 0541 815811 Fax +39 0541 933112 - www.metropolis-ivas.com
Company with quality management system certified UNI EN ISO 9001
TECHNICAL DATA SHEET
Issue 09-2012
STORAGE
Packaging
20 kg – 5 kg – 1 kg
Storage
Minimum and maximum temperature: +5°C +30°C.
The stability of the product is guaranteed for one year
if it is stored in its original packaging in a dry,
sheltered place. Do not store the product at less than
5°C.
SAFETY INFORMATION
Hazard classification
No hazard labels required in accordance with:
DL (Law Decree) of 3 February 1997 n° 52 amended by
DL of 25 February 1998 n°90, DMS (Ministry of Health
Decree) of 4 April 1997, DMS of 28 April 1997, DL of 16
July 1998 n° 285, Directive 1999/45/EC of 31 May 1999,
DMS of 7 July 1999, DMS of 10 April 2000, DMS of 26
January 2001, DMS of 11 April 2001, Directive 2001/58/EC,
Directive 2001/59/EC, Directive 2001/60/EC and
subsequent amendments.
Warning advice for the user
See the safety card
Odour limit
Odourless
Identification of type of waste material
In accordance with EEC decision 2000/532/EC amended as:
2001/118/EC, 2001/119/EC, 2001/573/EC and subsequent
amendments.
Plastic containers:
Classifiable with code 150102. Potentially treatable as
urban waste material in accordance with the
regulations of the individual municipalities.
Metal containers:
Classifiable with code 150104. Potentially treatable as
urban waste material in accordance with the
regulations of the individual municipalities.
If the containers contain residues of liquid material
they can be classified as code 080112.
Dispose of in accordance with local regulations.

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Quantity:
Weight:
0.00 LBS
Shipping:
Calculated at checkout


 

Connect with us

Newsletter