Loading... Please wait...
  • Image 1

Hover over main image to zoom

Metro Lux technical Sheet

$0.00

Product Description

METRO LUX
TECHNICAL DATA SHEET
GENERAL INFORMATION ON USE
Name
METRO LUX
Description
Water-based glossy varnish for plastic coatings. Ideal
for protecting decorative finishes from water contact.
Classification UNI 8681
Single-component varnish for finish coat, dispersed in
water, physical drying reaction, semigloss, acrylic
(A4.B.O.A.2.FA)
Use
Outdoors
Suitable Substrates
Plastic coatings, paint in general, cement plasters.
CHARACTERISTICS
Appearance/Composition
Physical state: liquid
Type of resin/binder: acrylic (UNI 8681: FA)
Appearance: glossy
Dimensional Characteristics
Absolute gravity: 1030 ± 50 g/litre
Performance Characteristics
Dry weight residue: 33 ± 2%
pH: 8 – 9
Colour Range
Colourless
APPLICATION
Ambient temperature: min +10°C max +40°C
Relative ambient humidity: max 80%
Preparation of the substrate
All the substrates must be carefully prepared by
manual brushing and/or by washing with high-pressure
cleaning equipment, depending on how dirty the
surfaces to be treated are and the kind of dirt.
Type of Equipment:
brush, short-haired woollen roller
Dilution
Type of diluent: water
Dilution:
as shiner for decorative applications: as it is
as a sealant: dilute with 4 litres to every litre of
product.
Application procedure
Stir before using. Apply two coats of the product,
leaving 4 h between them, as a protective shiner effect
for decorative applications
Drying or setting at ≈ 23°C
On the surface: 2 h
Coverage (with one coat)
8-10 m2/litre
Recommended amount used per m2: 125–100 ml.
Coverage per pack (10 litres): 100 m2 approx.
The coverage varies according to the roughness of the
substrate
Coating with paint
Compatibility with other products: with all thinner-free
products.
METRO LUX
N.B. This Technical Information Sheet is compiled to the best of our technical/scientific knowledge. Nevertheless, it is not binding and does not imply that we are
responsible, as the conditions of use are outside our control. It is recommended that the product is always checked as being suitable for the specific application.
IVAS Industria Vernici S.p.A. – Via Bellaria, 40 – 47030 San Mauro Pascoli (FC) – Italy
Phone +39 0541 815811 Fax +39 0541 933112 - www.metropolis-ivas.com
Company with quality management system certified UNI EN ISO 9001
TECHNICAL DATA SHEET
Issue 09-2013
STORAGE
Packaging
10 litres – 5 litres– 1 litre
Storage
Minimum and maximum temperature: +5°C +30°C.
The stability of the product is guaranteed for one year
if it is stored in its original packaging.
SAFETY INFORMATION
Hazard classification
No hazard labels required in accordance with:
DL (Law Decree) of 3 February 1997 n° 52 amended by
DL of 25 February 1998 n°90, DMS (Ministry of Health
Decree) of 4 April 1997, DMS of 28 April 1997, DL of 16
July 1998 n° 285, Directive 1999/45/EC of 31 May 1999,
DMS of 7 July 1999, DMS of 10 April 2000, DMS of 26
January 2001, DMS of 11 April 2001, Directive 2001/58/EC,
Directive 2001/59/EC, Directive 2001/60/EC and
subsequent amendments.
Warning advice for the user
See the safety card
Odour limit
Odourless
Identification of type of waste material
In accordance with EEC decision 2000/532/EC amended as:
2001/118/EC, 2001/119/EC, 2001/573/EC and subsequent
amendments.
Plastic containers:
Classifiable with code 150102. Potentially treatable as
urban waste material in accordance with the
regulations of the individual municipalities.
Metal containers:
Classifiable with code 150104. Potentially treatable as
urban waste material in accordance with the
regulations of the individual municipalities.
If the containers contain residues of liquid material
they can be classified as code 080112.
Dispose of in accordance with local regulations.

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Quantity:
Weight:
0.00 LBS
Shipping:
Calculated at checkout


 

Connect with us

Newsletter