Loading... Please wait...
  • Image 1

Hover over main image to zoom

Glam Technical Sheet

$0.00

Product Description

GLAM
TECHNICAL DATA SHEET
GENERAL INFORMATION ON USE
Name
GLAM
Description
Finishing coat based on resins, extenders and metallic
glitters designed for obtaining shades of gold and
silver with soft sheer effects obtained through games
of transparencies. It ensures excellent washability and
very low water absorption
Classification UNI 8681
Single-component vinyl gloss finish coat dispersed in
water, with physical drying reaction
(B4.C.O.A.0.HA)
Use
Indoors
Suitable substrates
Cement and lime-based plasters, painted plasters,
smooth plasterboard walls, exposed reinforced
concrete, concrete prefabricated elements, fibre
cement, wood
CHARACTERISTICS
Appearance/Composition
Physical state: liquid
Type of resin/binder: vinyl (UNI 8681: HA)
Appearance: gloss-metallic
Dimensional Characteristics
Absolute gravity: 1000 ± 50 g/l
Performance Characteristics
Dry weight residue: 38 ± 2%
pH: 7–8
Colour range
Harmony/Glam colour chart
APPLICATION
Ambient conditions
Ambient temperature: min +5°C max +40°C
Relative ambient humidity: max 80%
Preparation of the substrate
Walls:
the substrates must be carefully prepared by manual
brushing and/or by washing, depending on how dirty is
the surface to treat. Old paints must be removed.
Before applying on wet plaster make sure that it is set.
Apply a coat of Metro Fix and subsequently a coat of
Metro Cover in order to level the substrate.
Plasterboard:
the substrates must be carefully prepared by manual
brushing and/or by washing, making sure that they are
free of loose bits. Apply a coat of Metro Fix and
subsequently a coat of Metro Cover in order to level
the substrate.
Already painted or varnished wooden substrates:
scrape partially or generally to eliminate residues of
existing paint or varnish that is not firmly adherent or
completely remove the existing paint by washing with
a stripping solvent-based product.
New wooden substrates or old substrates already
treated as above:
grout here and there to fill in any gaps and
microcrazing with Metro Stuc. Sand lightly to make the
surface to be treated level and even. Apply a coat of
Metro Fix and sand slightly. Then verify the consistency
of the substrate: if there are dust and/or loose bits it is
necessary to apply again Metro Fix. Apply a coat of
Metro Cover in order to level the substrate.
Equipment
brush (Klimt Brush), marine sponge (Dalì Sponge), pad
(Picasso Pad, Renoir Pad), cloth, roller (Magritte
Roller), glove (Matisse Glove, Mirò Glove)
Dilution
Type of diluent: water
Dilution: 0-10% according to the desired effect
Application procedure
Apply a coat of GLAM 0-10% diluted with water, using
a brush or a pad. The shade intensity varies according
to the number of coats and to the application
technique; therefore, the choice of the procedure is left
to the creativity of the decorator
Drying or setting at ≈ 23°C
Surface: 4 h
Coverage (with one coat)
Applied uniformly 8-10 m2/l; applied veiled 12 m2/l
Recommended amount used per m2: 100 ml
Coverage per pack (2,5 l): 25 m2
The coverage varies according to the absorption of the
substrate and, above all, to the desired effect
GLAM
N.B. This Technical Information Sheet is compiled to the best of our technical/scientific knowledge. Nevertheless, it is not binding and does not imply that we are
responsible, as the conditions of use are outside our control. It is recommended that the product is always checked as being suitable for the specific application.
IVAS Industria Vernici S.p.A. – Via Bellaria, 40 – 47030 San Mauro Pascoli (FC) – Italy
Phone +39 0541 815811 Fax +39 0541 933112 - www.metropolis-ivas.com
Company with quality management system certified UNI EN ISO 9001
TECHNICAL DATA SHEET
Issue 09-2013
Coating with paint
Compatibility with other products: with all solvent-free
products
Note:
We recommend using the same lot of product on a
continuous surface, otherwise slight shade differences
cannot be excluded
STORAGE
Packaging
2,5 l – 1 l
Storage
Minimum and maximum temperature: +5°C +30°C.
The stability of the product is guaranteed for one year
if it is stored in its original packaging in a dry,
sheltered place. Do not store the product at less than
5°C.
SAFETY INFORMATION
Hazard classification
No hazard labels required in accordance with:
DL (Law Decree) of 3 February 1997 n° 52 amended by
DL of 25 February 1998 n°90, DMS (Ministry of Health
Decree) of 4 April 1997, DMS of 28 April 1997, DL of 16
July 1998 n° 285, Directive 1999/45/EC of 31 May 1999,
DMS of 7 July 1999, DMS of 10 April 2000, DMS of 26
January 2001, DMS of 11 April 2001, Directive 2001/58/EC,
Directive 2001/59/EC, Directive 2001/60/EC and
subsequent amendments.
Warning advice for the user
See the safety card
Odour limit
Odourless
Identification of type of waste material
In accordance with EEC decision 2000/532/EC amended as:
2001/118/EC, 2001/119/EC, 2001/573/EC and subsequent
amendments.
Plastic containers:
Classifiable with code 150102. Potentially treatable as
urban waste material in accordance with the
regulations of the individual municipalities.
Metal containers:
Classifiable with code 150104. Potentially treatable as
urban waste material in accordance with the
regulations of the individual municipalities.
If the containers contain residues of liquid material
they can be classified as code 080112.
Dispose of in accordance with local regulations.

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Quantity:
Weight:
0.00 LBS
Shipping:
Calculated at checkout


 

Connect with us

Newsletter