Loading... Please wait...
  • Image 1

Hover over main image to zoom

Customers also viewed

Canova Technical Sheet

$0.00

Product Description

CANOVA
TECHNICAL DATA SHEET
GENERAL INFORMATION ON USE
Name
CANOVA
Description
Extra-fine paste containing vinyl resins emulsified in
an aqueous phase and selected fillers for a thin layer
finish on indoor surfaces and jobs where you want a
soft, silky look reminiscent of Canova’s marvellous
work.
Classification UNI 8681
Single-component, finishing plaster, dispersed in
water, physical hardening reaction
(E4.C.O.C.A..HF)
Use
Indoors
Suitable Substrates
Cement plasters, painted plasters, walls and parts in
plasterboard, exposed reinforced concrete,
prefabricated panels, fibre cement, wood.
CHARACTERISTICS
Appearance/Composition
Physical state: extra-fine paste
Type of resin/binder: vinyl (UNI 8681: HF)
Dimensional Characteristics
Absolute gravity: 1690 ± 50 g/litre
Appearance: silky
Performance Characteristics
Dry weight residue: 73.1 ± 2 %
pH: 7-8
Colour range
Canova colour chart. Colour can be processed with the
dye meter system.
APPLICATION
Ambient conditions
Ambient temperature: min +5°C max +40°C
Relative ambient humidity: max 80%
Type of Equipment
stainless steel trowel (Stainless Steel Pollock
trowel), plastic trowel (Gauguin Plastic Trowel)
Preparation of the substrate
Walls:
the substrates must be carefully prepared by
manual brushing and/or by washing, depending
on how dirty is the surface to treat. Old paints
must be removed. Before applying on wet plaster
make sure that it is set. Apply a coat of Metro Fix
and subsequently a coat of Metro Cover in order
to level the substrate.
Plasterboard:
the substrates must be carefully prepared by
manual brushing and/or by washing, making sure
that they are free of loose bits. Apply a coat of
Metro Fix and subsequently a coat of Metro Cover
in order to level the substrate.
Already painted or varnished wooden substrates:
scrape partially or generally to eliminate residues
of existing paint or varnish that is not firmly
adherent or completely remove the existing paint
by washing with a stripping solvent-based
product.
New wooden substrates or old substrates already
treated as above:
grout here and there to fill in any gaps and
microcrazing with Metro Stuc. Sand lightly to
make the surface to be treated level and even.
Apply a coat of Metro Fix and sand slightly. Then
verify the consistency of the substrate: if there
are dust and/or loose bits it is necessary to apply
again Metro Fix. Apply a coat of Metro Cover in
order to level the substrate.
Dilution
ready to use
Application procedure
Apply the product with a steel putty knife for a
smooth and homogeneous finish. Any roughly finished
parts of the substrate should be treated with filler
beforehand. After the last smoothing, when the
product is dry, go over it with 800 sandpaper for a
silky effect. You can finish off with Metro Cera flat
synthetic wax.
Drying or setting at ≈ 23°C
The product can be sandpapered after about 3-4 hours
but the time varies according to the thickness applied
and the ambient conditions.
Coverage
On two-coat render: 1.6 m2/kg (one coat); 0.8 m2/kg
(two coats); On plaster skim coat: 2.2 m2/kg (one
coat);
Recommended amount used per m2: 1250 g (two coats)
Coverage per pack (20 kg): 16 m2 approx. (two coats)
The coverage varies according to the roughness of the
substrate.
Coating with paint
Compatibility with other products: with all water-based
products.
CANOVA
N.B. This Technical Information Sheet is compiled to the best of our technical/scientific knowledge. Nevertheless, it is not binding and does not imply that we are
responsible, as the conditions of use are outside our control. It is recommended that the product is always checked as being suitable for the specific application.
IVAS Industria Vernici S.p.A. – Via Bellaria, 40 – 47030 San Mauro Pascoli (FC) – Italy
Phone +39 0541 815811 Fax +39 0541 933112 - www.metropolis-ivas.com
Company with quality management system certified UNI EN ISO 9001
TECHNICAL DATA SHEET
Issue 09-2013
Note
We recommend to use the same lot of product on a
continuous surface, otherwise, slight differences
cannot be excluded.
STORAGE
Packaging
20 kg – 10 kg - 5 kg – 1 kg
Storage
Minimum and maximum temperature: +5°C +30°C.
The stability of the product is guaranteed for one year
if it is stored in its original packaging in a dry,
sheltered place. Do not store the product at less than
5°C.
SAFETY INFORMATION
Hazard classification
No hazard labels required in accordance with:
DL (Law Decree) of 3 February 1997 n° 52 amended by
DL of 25 February 1998 n°90, DMS (Ministry of Health
Decree) of 4 April 1997, DMS of 28 April 1997, DL of 16
July 1998 n° 285, Directive 1999/45/EC of 31 May 1999,
DMS of 7 July 1999, DMS of 10 April 2000, DMS of 26
January 2001, DMS of 11 April 2001, Directive 2001/58/EC,
Directive 2001/59/EC, Directive 2001/60/EC and
subsequent amendments.
Warning advice for the user
See the safety card
Odour limit
Odourless
Identification of type of waste material
In accordance with EEC decision 2000/532/EC amended as:
2001/118/EC, 2001/119/EC, 2001/573/EC and subsequent
amendments.
Plastic containers:
Classifiable with code 150102. Potentially treatable as
urban waste material in accordance with the
regulations of the individual municipalities.
Metal containers:
Classifiable with code 150104. Potentially treatable as
urban waste material in accordance with the
regulations of the individual municipalities.
If the containers contain residues of liquid material
they can be classified as code 080112.
Dispose of in accordance with local regulations.

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Quantity:
Weight:
0.00 LBS
Shipping:
Calculated at checkout


 

Connect with us

Newsletter